In this Category

NEO CV500 CV Grease

Price: $37.99 each

Neo Synthetics Moly-based CV500 High-Performance CV Grease. 12.5 oz

NEO CV500 CV grease is an excellent choice for the typical Vanagon application where reliability and longevity are desired. Anti-seize up to 1200Fº, extremely water-washout resitant, good for many other applications like urethane bushing lube.

See the Technical Details tab for more information.

For lifted 2wds and Syncros where the CVs see extreme operating angles and plunge or for higher horsepower applications, NEO HPCC#1 CV Grease is the ultimate choice (link below). 


Protect your investment and reduce failures by choosing high performance CV grease over standard auto parts store CV grease. Yes, on the surface it may seem expensive, but with the time, money and effort that it takes to change CVs on a Vanagon, it pays to use the best products that you can find. It may seem expensive up front, but the frustration that you will save by not having to deal with your CVs for thousands and thousands of miles makes it a worthwhile investment.

Comes in a convenient cartridge tube (tip included) for use with a caulking gun. The caulking gun cartridge makes greasing the CV joints much less messy since you can insert the tip of the tube right into the joint and squeeze the into the voids.

Designed for CV and articulated joints, CV500 is a moly - based ant-seize lubrication paste for temperatures up to 1200º F.

CV500 Grease is a complex blend of mineral oils, synthetic esters and lubricating solids. Should be used when temperature extremes are not a problem. Their designed use is for severe sliding contact such as extremely heavily loaded ways and guides, very slow, large diameter ball and roller bearings, bushings, linear and oscillating mechanism and open gears, articulated, CV and universal Joints subject to the harshest shock loading, angularity and radial forces. Can be used on sensitive metallurgy including copper, silver, tin, and aluminum and their alloys. Exceptionally resistant to water wash conditions including emulsions. Special compounding and lubricating solids provide superior anti-seize characteristics and exceptional acid resistance.

NOTE: HPCC#1 Should be used when extreme high (over 1200º F) and low temperatures are encountered or sustained. Elevated temperatures indicate extra protection is needed.

Vehicular uses of NEO CV 500 Grease are typically constant velocity couplings (CV Joints) and industrial applications include linear reciprocating mechanisms, heavily loaded ways and guides, spline couplings subject to linear motion and heavy loads in either direction, press fit and assembly operations, jack screws, mechanical presses, and very slow, large diameter ball and roller bearings. Special applications include Anti-Seize to 1200ºF, Assembly and spline lubricant, racing cam lubricant, press fitting stainless steel, jack screws, high temperature open Gear Lubricant, Mechanical Presses, Dipper Sticks and Fasteners. Pump and valve lubrication in corrosive environments. MoS2 (Moly) is recommended for all constant velocity joints except for double articulated spider types.




Please view the following link for more information about shipping, payments and returns:


*All prices are in U.S Dollars